Crappie Fishing USA

Drift Fishing for Crappie

Home
Articles & Tips
Message Forums
Tournaments
Fishing Resources
Cookbook
Instant Crappie Kit
Rocket Bobber
Useful Links
Contact Us
Crappie Pro Shop

crappiefishingusa2logo.jpg

Drift Fishing For Crappie: A Productive Way To Catch Some Big Crappie 

Equipment You Will Need:
Boat
Trolling motor
Marker buoys
Spinning Tackle
Crappie rigs
Marker buoys
Jigs


Best Location To Drift Fish
   The Hardest part about catching crappie while drift fishing is locating the schools.  You will need a topographical map of the area, and should have a good depth finder.  You can pick the topographical map up at the local bait store. (It's advisable to go there to get the latest fishing report anyway.) Crappie school in open water and if you can find the schools, you can catch a good batch of crappie. 

   Also it has been my experience , the crappie you catch in open water while drift fishing seem to be bigger. The first step you should do before you get out on the water is locate the deepest part of body of water you are fishing on from your topographical map, this will be your starting point. You will be fishing the break areas on the bottom surface. 

   To Locate a break area, look for changes in depth on your depth finder. Any break deep to shallow, or shallow to deep are good spots to drift. Try to avoid any flat bottom surface areas. You will just waist your time in these areas.

How to Set Your Drift for Crappie Fishing
   Locate the wind's direction and set you boat in position to drift along the break (change in bottom depth).  Make sure your boat drifts along the deeper side of the break. You will use your trolling motor to keep your drift in position along the deep side of the break. If you don't have a trolling motor, you'll have to use you boat motor to get back in position, (this can spook the fish, thats why a trolling motor is recommended).  The Depth finder will be your guide to stay along the deep side of the break, and to locate the fish.  

   Set up a weighted crappie rig to just touch bottom with sinker position, your baits about 18 to 24 inches off the bottom.  As you drift, watch the rod tip.  It will bounce up and down slightly as the weight drags along the bottom.  If the tip of the rod remains still, the sinker is not in contact with the bottom.  When you catch the first fish drop one of your marker buoys to mark the spot.

   Continue to drift until another fish is caught or about 75 yards, then drop another buoy. This marks your drift location for a return drift or anchor position.  Drift about 50 more yards past the second buoy then start up your boat motor and go around the buoys approximately 75yards away.  Now move your boat back in position for another drift. 

   Normally the school will be concentrated in one area.  Keep working the spot until you get no more bites.  If you're lucky, you can catch your limit and a short time.

You can use this technique on any body of water, so have fun and good luck!

Author:  Mark Fleagle:  A well respected fishing enthusiast with 30+ years of fishing experience,who has published many fishing articles. Mark has been a online presence for fishing information for going on 4 years. my site: http://www.oldfishinghole.com  Get your free copy of "78 Fishing Discoveries Unleashed".




Article Source: http://EzineArticles.com/1019476

Welcome to the Most Comprehensive Crappie Fishing Site on the Web!